There are a few steps that can be taken to test your pump/motor. To test that your pump/motor is not the issue you may jump the harness. When doing so, you may check to see if it has suction. Do not leave anything on the suction end of the pump as this can cause the […]
First, promptly and thoroughly clean the unit. In three separate rinses -using a minimum of 2 gallons (7.6 L) for each rinse. Second, please use the cleaners and neutralizers as recommended for the last rinse.
This sprayer uses a 12 Volt Flojet diaphragm pump. 5.0 GPM
The full length of the wand is 15″ with 8-foot self-retracting hose.
No, this unit is not capable of use for hydroseeding.
Yes, each nozzle can be turned off individually.
No, it is not possible to run the boom and the wand at the same time.
No, at this time, Spyker does not make a boom for other sprayers.
Yes, over the years Brinly Hardy has used 3 different types of roller plugs. Our current iteration of plugs comes with a tether/chain so that you never have to worry about losing your plug again. To purchase this plug, head on over to the parts store to pick up a #1019524.
Yes! The roller drum if formed with a “memory” to hold its shape. Simply remove the plug, empty the roller drum and set it in direct sunlight, with the flat spot up. The heat from the sun will expand the roller drum and it will go back round. Note: If the unit does not reform […]