The Lawn roller may be useful in other areas than just lawns. The lawn roller can be helpful with sod as well as some soft surface application. The lawn roller should not be used on gravel lest the rocks puncture the polycarbonate shell.

Check out the FAQ video for Spyker Lawn Rollers &feature=youtu.be”>here.

Yes! The roller drum if formed with a “memory” to hold its shape. Simply remove the plug, empty the roller drum and set it in direct sunlight, with the flat spot up. The heat from the sun will expand the roller drum and it will go back round.

Note: If the unit does not reform immediately, be patient. Slowly rotate the unit over the course of a day or two to remove the flat spot.

Yes, over the years Brinly Hardy has used 3 different types of roller plugs. Our current iteration of plugs comes with a tether/chain so that you never have to worry about losing your plug again. To purchase this plug, head on over to the parts store to pick up a #1019524.

Yes, you will need to drain the roller completely and store it without the plug-in place. Changes in atmospheric pressure will cause the unit to warp if the plug is left in for storage.

You can fill the roller with sand, small gravel, or event cement. Please note that doing so voids the warranty and Brinly will not cover damages to units that were used with materials other than water.

We do not recommend using the unit in reverse except when necessary. The towbar was not designed to handle the weight of a full roller in reverse.

This sprayer uses a 12 Volt Flojet diaphragm pump. 5.0 GPM

The full length of the wand is 15″ with 8-foot self-retracting hose.

There are a few steps that can be taken to test your pump/motor. To test that your pump/motor is not the issue you may jump the harness. When doing so, you may check to see if it has suction. Do not leave anything on the suction end of the pump as this can cause the pump to burn out. Additionally, check the strainer for blockage.

Yes, Spyker offers assembly help in the form of manuals, videos, and over the phone assistance. To watch the assembly video, please select your model’s product page and click the red assembly box or visit our YouTube channel.

First, promptly and thoroughly clean the unit. In three separate rinses -using a minimum of 2 gallons (7.6 L) for each rinse. Second, please use the cleaners and neutralizers as recommended for the last rinse.

Check out this YouTube video for how to properly calibrate your Spyker Drop-In Sprayer, model SPYDSB-9G. “>Spyker Drop-In Sprayer Calibration | SPYDSB-9G (youtube.com)

No, at this time, Spyker does not make a boom for other sprayers.

No, this unit is not capable of use for hydroseeding.

No, it is not possible to run the boom and the wand at the same time.

Yes, each nozzle can be turned off individually.

Learn more about Spyker “>here.

Learn more about Spyker Spreaders at

Check out our dealer locator here.

This unit comes with a Honda GXV-160, which has a three-year commercial warranty.

Honda GXV-160, which has a three-year commercial warranty.

The gears on these spreaders are made from die-cast aluminum and they have a lifetime warranty.

Die-Cast Aluminum and they have a lifetime warranty.

Stamped Metal Gears with one-year manufacturer’s warranty.

The tool free design allows for the deflector to be moved up and down to different positions to change the spread width, &list=PLIZhyoHfNPhITARGLWoKc1tJfsvzIyXAV&index=4″>see this product video for more information.

The tool free design allows for the deflector to be moved up and down to different positions to change the spread width, See product video for more information.

Using the Deflector lever on the control panel, see the operators manual for more information.

Using the Accuway adjustment screw, see Accuway video for more information.

Using the Accuway lever on the control panel, see the operators manual for more information.

Using the Accuway adjustment screw, check out &list=PLIZhyoHfNPhIfYKtCfz-Gt1-IZqfREZXz&index=6″>this video for more information on the Accuway system.

Only four bolt holes are provided, you can make your own mount or you can purchase the KSPLS15-HITCH

Yes, it is included.

Yes, it is included.

Yes, it is included

No – you would need to order the cable kit (KSP14-CAB1), which will allow remote operation.

Yes, these are available as accessories, check out parts store for more.

Yes, these are available as accessories.

Yes, this unit can be used for top-dressing with sand as long as you are using Kiln-dried sand.

Yes, if you use Kiln-dried sand you can, we also offer a top-dressing kit as well.

Yes, if you use Kiln dried sand you can, we also offer a top-dressing kit as well.

Only if it is treated bulk salt with no large clumps.

Only if it is treated bulk salt with no large clumps.